Solid Phase Oligo-DNA Extraction from Complex Medium Using an Aminated Graphene/Nitrocellulose Membrane Hybrid.

A hybrid material, consisting of commercially available nitrocellulose (NC) membrane non-covalently modified with amino-polyethylene glycol functionalized reduced graphene oxide (NH2-PEG-rGO) nanoparticles, was successfully synthesized for oligonucleotide extraction. Fourier Transform Infrared Spectroscopy (FTIR) confirmed the modification of the NC membrane, revealing characteristic peaks of both compounds, i.e., NC and NH2-PEG-rGO. Scanning Electron Microscopy (SEM) exhibited morphological changes in the NC/NH2-PEG-rGO hybrid membrane, marked by the introduction of NH2-PEG-rGO particles, resulting in a distinctly smothered surface compared to the porous surface of the NC control membrane. Wettability assays revealed hydrophobic behavior for the NC/NH2-PEG-rGO hybrid membrane, with a water contact angle exceeding 90°, contrasting with the hydrophilic behavior characterized by a 16.7° contact angle in the NC membrane. The performance of the NC/NH2-PEG-rGO hybrid membrane was evaluated for the extraction of ssDNA with fewer than 50 nucleotides from solutions containing various ionic species (MnCl2, MgCl2, and MnCl2/MgCl2). The NC/NH2-PEG-rGO hybrid membrane exhibited optimal performance when incubated in MgCl2, presenting the highest fluorescence emission at 525 relative fluorescence units (r.f.u.). This corresponds to the extraction of approximately 610 pg (≈13%) of the total oligo-DNA, underscoring the efficacy of the pristine material, which extracts 286 pg (≈6%) of oligo-DNA in complex solutions.

Integration of a hamper pad on test strips for improved sensitivity of carbendazim detection.

Lateral flow immunoassays (LFIAs) are widely used to determine carbendazim (CBZ) residues in food products due to their advantages of low cost, ease and rapid use, on-site detection capability. However, conventional LFIAs have low detection sensitivity. Although improvements have been made to increase the sensitivity, it is not sufficient. Here, a hamper pad, polyvinyl alcohol coated on a nitrocellulose membrane, was integrated to enhance the sensitivity of LFIA for CBZ detection. The hamper pad was inserted between the conjugated and nitrocellulose pads to delay the flow rate, thereby increasing the possibility of the antibody and target analyte binding. This platform exhibited a fourfold sensitivity increase in CBZ detection compared with the conventional LFIA, and its limit of detection was 1.6 ng/mL. In addition, a single-step operation was successfully applied to detect CBZ in rice (white rice, brown rice, sticky rice, and paddy) and soybean samples, with acceptable recoveries of 93.6%-120.0%. This novel device was compared to the standard high-performance liquid chromatography method, which shows high accuracy with a Kappa coefficient of 0.91. Therefore, improved sensitivity with a rapid, simple, and inexpensive device could facilitate the detection of CBZ residues in agricultural products for on-field screening and improved user-friendliness.

Autosomal recessive ALOX12B gene and consecutive collodion baby.

Autosomal recessive congenital ichthyosis is a type of inherited ichthyosis which is a rare cluster of genetic disorders leading to defective keratinisation. The combined prevalence for lamellar ichthyosis and congenital ichthyosiform erythroderma is almost 1 per 200 000-300 000 people. Among all the mutations in this gene, missense and frameshift mutations are most common which account for 80% of the cases. Our patient had a mutation in R-type arachidonate 12-lipoxygenase gene (ALOX12B, OMIM*603741).

NFC-enabled potentiostat and nitrocellulose-based metal electrodes for electrochemical lateral flow assay.

Rapid detection of pathogens at the point-of-need is crucial for preventing the spread of human, animal and plant diseases which can have devastating consequences both on the lives and livelihood of billions of people. Colorimetric, lateral flow assays consisting of a nitrocellulose membrane, are the preferred format today for low-cost on-site detection of pathogens. This assay format has, however, historically suffered from poor analytical performance and is not compatible with digital technologies. In this work, we report the development of a new class of digital diagnostics platform for precision point-of-need testing. This new versatile platform consists of two important innovations: i) A wireless and batteryless, microcontroller-based, low-cost Near Field Communication (NFC)-enabled potentiostat that brings high performance electroanalytical techniques (cyclic voltammetry, chronoamperometry, square wave voltammetry) to the field. The NFC-potentiostat can be operated with a mobile app by minimally trained users; ii) A new approach for producing nitrocellulose membranes with integrated electrodes that facilitate high performance electrochemical detection at the point-of-need. We produced an integrated system housed in a 3D-printed phone case and demonstrated its use for the detection of Maize Mosaic Virus (MMV), a plant pathogen, as a proof-of-concept application.

Split Retina as an Improved Flatmount Preparation for Studying Inner Nuclear Layer Neurons in Vertebrate Retina.

Bipolar cells and horizontal cells of the vertebrate retina are the first neurons to process visual information after photons are detected by photoreceptors. They perform fundamental operations such as light adaptation, contrast sensitivity, and spatial and color opponency. A complete understanding of the precise circuitry and biochemical mechanisms that govern their behavior will advance visual neuroscience research and ophthalmological medicine. However, current preparations for examining bipolar and horizontal cells (retinal whole mounts and vertical slices) are limited in their capacity to capture the anatomy and physiology of these cells. In this work, we present a method for removing photoreceptor cell bodies from live, flatmount mouse retinas, providing enhanced access to bipolar and horizontal cells for efficient patch clamping and rapid immunolabeling. Split retinas are prepared by sandwiching an isolated mouse retina between two pieces of nitrocellulose, then gently peeling them apart. The separation splits the retina just above the outer plexiform layer to yield two pieces of nitrocellulose, one containing the photoreceptor cell bodies and another containing the remaining inner retina. Unlike vertical retina slices, the split retina preparation does not sever the dendritic processes of inner retinal neurons, allowing for recordings from bipolar and horizontal cells that integrate the contributions of gap junction-coupled networks and wide-field amacrine cells. This work demonstrates the versatility of this preparation for the study of horizontal and bipolar cells in electrophysiology, immunohistochemistry, and in situ hybridization experiments.

Immunoblot Analysis from Single Cells Using Milo™ Single-Cell Western Platform.

In this new era of precision medicine, characterization of single-cell subpopulations to better understand disease etiology is paramount. It is thus an opportune time to explore techniques that allow molecular analysis of single cells and to better understand the basis of pathogenesis of diseases like cancer. Single-cell western blotting is one such method that allows analysis of single cells at the protein level. In contrast to traditional western blotting, which relies heavily on bulk analysis of lysates generated from tissues and is often indicative of the population average, this technique allows analysis of lysates from single-cell subpopulations thereby providing a glimpse into cell heterogeneity. The method entails the use of a chip containing 30 µm thick photoactivated polyacrylamide gel spotted with nearly 6400 microwells. Single cells loaded on the chip are captured in the microwells by passive gravity and are then lysed and electrophoresed using the MILO™ single-cell western platform. This method forgoes the use of transfer of proteins on a PVDF and a nitrocellulose membrane, as performed in traditional western blotting, and all other steps including probing of primary and fluorescent secondary antibodies against the protein of interest are performed directly on the chip. The proteins of interest can then be visualized by scanning a chip with the use of a microarray scanner. The entire procedure can be performed in as less as 4-6 h, and thus this method provides several advantages over traditional western blotting.

Enhancing Single-Cell Western Blotting Sensitivity Using Diffusive Analyte Blotting and Antibody Conjugate Amplification.

While there are many techniques to achieve highly sensitive, multiplex detection of RNA and DNA from single cells, detecting protein content often suffers from low limits of detection and throughput. Miniaturized, high-sensitivity Western blots on single cells (scWesterns) are attractive because they do not require advanced instrumentation. By physically separating analytes, scWesterns also uniquely mitigate limitations to target protein multiplexing posed by the affinity reagent performance. However, a fundamental limitation of scWesterns is their limited sensitivity for detecting low-abundance proteins, which arises from transport barriers posed by the separation gel against detection species. Here we address the sensitivity by decoupling the electrophoretic separation medium from the detection medium. We transfer scWestern separations to a nitrocellulose blotting medium with distinct mass transfer advantages over traditional in-gel probing, yielding a 5.9-fold improvement in the limit of detection. We next amplify probing of blotted proteins with enzyme-antibody conjugates, which are incompatible with traditional in-gel probing to achieve further improvement in the limit of detection to 1000 molecules, a 120-fold improvement. This enables us to detect 100% of cells in an EGFP-expressing population using fluorescently tagged and enzyme-conjugated antibodies compared to 84.5% of cells using in-gel detection. These results suggest the compatibility of nitrocellulose-immobilized scWesterns with a variety of affinity reagents─not previously accessible for in-gel use─for further signal amplification and detection of low-abundance targets.

Toward the Development of Simplified Lateral Flow Assays Using Hydrogels as the Universal Control Line.

Lateral flow assays (LFA) have been widely utilized as point-of-care testing devices in diverse fields. However, it is imperative to preprint costly bioreceptors onto the lateral flow nitrocellulose membrane at the control line. The complex manufacturing process and relatively limited detection capabilities of LFA have impeded their utilization in more challenging fields. Here, we propose a novel and simple strategy to simplify the manufacture of LFA while simultaneously improving the sensitivity by modifying the hydrogel line (HL). In our study, it was observed that the sensitivity of commercial LFA strips could be enhanced by 2-5-fold by incorporating an extra HL. Particularly, a universal control line was developed to accommodate multiple LFA detection modes by substituting the conventional antibody control line with a hydrogel control line (HCL). As a proof of concept, the HCL performance could be associated with the slowdown and interception effect toward fluid, which are dependent on the permeation and hydrophilicity of the hydrogel with varying concentrations in the nitrocellulose membrane. This new design builds the foundation to enhance the sensitivity and develop the simplified LFA sensing platform without additional complicated processes.

A NitroPure Nitrocellulose Membrane-Based Grapevine Virus Sampling Kit: Development and Deployment to Survey Japanese Vineyards and Nurseries.

We developed a NitroPure Nitrocellulose (NPN) membrane-based method for sampling and storing grapevine sap for grapevine virus detection. We devised an efficient nucleic acid extraction method for the NPN membrane, resulting in 100% amplification success for grapevine leafroll-associated virus 2 (GLRaV2) and 3 (GLRaV3), grapevine rupestris stem pitting-associated virus (GRSPaV), grapevine virus A, grapevine virus B, and grapevine red blotch virus (GRBV). This method also allowed the storage of recoverable nucleic acid for 18 months at room temperature. We created a sampling kit to survey GLRaV2, GLRaV3, and GRBV in Japanese vineyards. We tested the kits in the field in 2018 and then conducted mail-in surveys in 2020-2021. The results showed a substantial prevalence of GLRaV3, with 48.5% of 132 sampled vines being positive. On the other hand, only 3% of samples tested positive for GLRaV2 and none for GRBV.

Case report of self-improving collodion ichthyosis in the newborn.

Self-improving collodion ichthyosis (SICI) is a relatively rare subtype of autosomal recessive congenital ichthyosis (ARCI) that is often characterized by a collodion baby (CB) phenotype at birth. A newborn girl, just 1 hour old, presented with taut, shiny, thick yellow crusts, like parchment, and scales on her trunk and upper limbs. The tightening effect had caused both upper eyelids to appear everted, and her lips and auricles were deformed. Based on whole-exome sequencing and examination of the clinical phenotype, the patient was diagnosed with ARCI. After admission, the exposed mucosa was covered with a sterile Vaseline gauze dressing, and she was placed in an incubator set to a temperature of 32°C with a humidity level of 75%. One week later, the parchment-like scales had begun to flake off, and at the age of 3 weeks, all bodily skin appeared normal. SICI was diagnosed. After discharge, the patient was followed up to 3 months of age, at which time her growth and development were comparable to those of her peers. Clinicians should consider SICI as a possible diagnosis when analyzing the prognosis of patients with CB. Reducing water loss and maintaining the electrolyte balance are particularly important for SICI treatment.

Nitrocellulose membranes in situ grown with Prussian blue nanoparticles as stable nanozyme pads for colorimetric detection of dopamine.

Prussian blue (PB) is a typical peroxidase mimic with simple preparation, low cost and high eco-friendliness, but it still has drawbacks of poor stability (e.g., decomposition in aqueous dispersions) and intrinsic optical interference (e.g., high extinction coefficient over a wide wavelength range) in colorimetric assays. Herein, we used nitrocellulose (NC) membranes as synthesis hosts of PB nanoparticles (NPs) to develop a new type of three-dimensional (3D) porous nanozyme pad. By means of an in situ synthesis route, PB NPs were uniformly grown on the surfaces of the fiber scaffolds with desirable stability, which also avoided signal interference from PB NPs owing to the easy handling of the pads in a quantitative solid state. The pads showed significant peroxidase-mimicking activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with the output of colorimetric signals. Based on the reduction of oxidized TMB (oxTMB) by dopamine (DA), the pads were exploited for simple and quantitative colorimetric detection of DA with a limit of detection (LOD) of 0.59 µM and a satisfactory accuracy for analysis of real human urine samples. This is the first attempt at exploiting NC membranes as the synthesis hosts to develop nanozyme pads, which solves the above drawbacks of traditional PB-based peroxidase mimics and has promise for various colorimetric bioanalyses, given the structural benefits of NC membranes and their broad applications in biosensors.

Vertical Flow Immunoassay Based on Carbon Black Nanoparticles for the Detection of IgG against SARS-CoV-2 Spike Protein in Human Serum: Proof-of-Concept.

Point-of-care tests play an important role in serological diagnostics of infectious diseases and post-vaccination immunity monitoring, including in COVID-19. Currently, lateral flow tests dominate in this area and show good analytical performance. However, studies to improve the effectiveness of such tests remain important. In comparison with lateral flow tests, vertical flow immunoassays allow for a reduction in assay duration and the influence of the hook effect. Additionally, the use of carbon black nanoparticles (CNPs) as a color label can provide a lower detection limit (LOD) compared to conventional colloidal gold. Therefore, we have developed a vertical flow immunoassay for the detection of IgG against SARS-CoV-2 spike protein in human serum samples by applying a conjugate of CNPs with anti-human IgG mouse monoclonal antibodies (CNP@MAb). The vertical flow assay device consists of a plastic cassette with a hole on its top containing a nitrocellulose membrane coated with spike protein and an absorbent pad. The serum sample, washing buffer, and CNP@MAb flow vertically through the nitrocellulose membrane and absorbent pads, reducing assay time and simplifying the procedure. In positive samples, the interaction of CNP@MAb with anti-spike antibodies leads to the appearance of black spots, which can be visually detected. The developed method allows for rapid visual detection (5-7 min) of IgG vs. spike protein, with a LOD of 7.81 BAU/mL. It has been shown that an untrained operator can perform the assay and visually evaluate its results. Thus, the presented assay can be used in the further development of test systems for the serological diagnostics of COVID-19 or post-vaccination immunity monitoring.

Graphene Oxide/Nitrocellulose Non-Covalent Hybrid as Solid Phase for Oligo-DNA Extraction from Complex Medium.

A nitrocellulose-graphene oxide hybrid that consists of a commercially nitrocellulose (NC) membrane non-covalently modified with graphene oxide (GO) microparticles was successfully prepared for oligonucleotide extraction. The modification of NC membrane was confirmed by Fourier Transform Infrared Spectroscopy (FTIR), which highlighted the principal absorption bands of both the NC membrane at 1641, 1276, and 835 cm-1 (NO2) and of GO in the range of 3450 cm-1 (CH2-OH). The SEM analysis underlined the well-dispersed and uniform coverage of NC membrane with GO, which displayed thin spider web morphology. The wettability assay indicated that the NC-GO hybrid membrane exhibited slightly lower hydrophilic behavior, with a water contact angle of 26.7°, compared to the 15° contact angle of the NC control membrane. The NC-GO hybrid membranes were used to separate oligonucleotides that had fewer than 50 nucleotides (nt) from complex solutions. The features of the NC-GO hybrid membranes were tested for extraction periods of 30, 45, and 60 min in three different complex solutions, i.e., an aqueous medium, an α-Minimum Essential Medium (αMEM), and an αMEM supplemented with fetal bovine serum (FBS). The oligonucleotides were desorbed from the surface of the NC-GO hybrid membrane using Tris-HCl buffer with a pH of 8.0. Out of the three media utilized, the best results were achieved after 60 min incubation of the NC-GO membranes in αMEM, as evidenced by the highest fluorescence emission of 294 relative fluorescence units (r.f.u.). This value corresponded to the extraction of approximately 330-370 pg (≈7%) of the total oligo-DNA. This method is an efficient and effortless way to purify short oligonucleotides from complex solutions.

An integrated immunochromatographic device for C-reactive protein detection using hierarchical dendritic gold nanostructure films.

Immunochromatographic test strips typically consist of sample pad, conjugate pad, nitrocellulose membrane, and absorbent pad. Even minute variations in the assembly of these components can lead to inconsistent sample-reagent interactions, thereby reducing reproducibility. In addition, the nitrocellulose membrane is susceptible to damage during assembly and handling. To address this issue, we propose to replace the sample pad, conjugate pad, and nitrocellulose membrane with hierarchical dendritic gold nanostructure (HD-nanoAu) films to develop a compact integrated immunochromatographic strip. The strip uses quantum dots as a background fluorescence signal and employs fluorescence quenching to detect C-reactive protein (CRP) in human serum. A 5.9 µm thick HD-nanoAu film was electrodeposited on an ITO conductive glass by the constant potential method. The wicking kinetics of the HD-nanoAu film was thoroughly investigated, and the results indicated that the film exhibited favorable wicking properties, with a wicking coefficient of 0.72 µm ms-0.5. The immunochromatographic device was fabricated by etching three interconnected rings on HD-nanoAu/ITO to designate sample/conjugate (S/C), test (T), and control (C) regions. The S/C region was immobilized with mouse anti-human CRP antibody (Ab1) labeled with gold nanoparticles (AuNPs), while the T region was preloaded with polystyrene microspheres decorated with CdSe@ZnS quantum dots (QDs) as background fluorescent material, followed by mouse anti-human CRP antibody (Ab2). The C region was immobilized with goat anti-mouse IgG antibody. After the samples were added to the S/C region, the excellent wicking properties of the HD-nanoAu film facilitated the lateral flow of the CRP-containing sample toward the T and C regions after binding to AuNPs labeled with CRP Ab1. In the T region, CRP-AuNPs-Ab1 formed sandwich immunocomplexes with Ab2, and the fluorescence of QDs was quenched by AuNPs. The ratio of fluorescence intensity in the T region to that in the C region was used to quantify CRP. The T/C fluorescence intensity ratio was negatively correlated with the CRP concentration in the range of 26.67-853.33 ng mL-1 (corresponding to 300-fold diluted human serum), with a correlation coefficient (R2) of 0.98. The limit of detection was 15.0 ng mL-1 (corresponding to 300-fold diluted human serum), and the range of relative standard deviation: 4.48-5.31%, with a recovery rate of 98.22-108.33%. Common interfering substances did not cause significant interference, and the range of relative standard deviation: 1.96-5.51%. This device integrates multiple components of conventional immunochromatographic strips onto a single HD-nanoAu film, resulting in a more compact structure that improves the reproducibility and robustness of detection, making it promising for point-of-care testing applications.

Wet nitrocellulose membrane for the level 3 feature visualization of various latent fingerprints and gender determination.

A facile and high-resolution enhancement of latent fingerprints (LFPs) has been developed by using a wet nitrocellulose (NC) membrane as a matrix under natural light. A clear fingerprint pattern was presented on the membrane after a fingertip touch owing to the difference in light transmittance between the ridge residues and the wet-NC-membrane background. Compared with conventional methods, this protocol can provide a higher resolution fingerprint image to extract level 3 details accurately. It is also compatible with commonly used fingerprint visualization techniques (magnetic ferric oxide powder and AgNO3. The modified membrane could be more general to realize the high-resolution visualization of LFP transferred from various substrates, even independent of light projection. Due to the excellent feasibility and reproducibility of level 3 details extracted by the wet NC membrane, the frequency distribution of the distance between adjacent sweat pores (FDDasp) could be used to effectively distinguish the fragmentary fingerprints. Finally, the level 3 features of LFPs from females and males were conveniently extracted by the wet-NC-membrane method for gender identification. The statistical results indicated that females had a higher average sweat pore density (115/9 mm2) than males (84/9 mm2). Taken together, this approach provided a high-resolution, reproducible, and accurate imaging of LFPs, which shows great promise for forensic information analysis.

Heat-induced antigen retrieval utilizing modified Tris-EDTA buffer for reprobing of Western blots on nitrocellulose paper.

The development of heat-induced antigen retrieval technologies with Tris-EDTA buffer has dramatically improved immunostaining of specific antigens for routine immunohistochemical detection (Krenacs et al., 2010) [1]. However, little evidence exists on whether heat-Induced antigen retrieval utilizing Tris-EDTA buffer can strip western blot (WB) membranes and allow sequential reprobing. Here, we serendipitously discover that ∼95 °C Tris-EDTA buffer with 0.01% Tween 20 could repeatedly strip the Nitrocellulose membranes (NC). After electroblotting, NC blots were soaked into Tris-EDTA stripping buffer (∼95 °C, 10-25min) and we could perform at least five rounds (the following antibodies used: Vinculin, Atg7, Caspase-3, UBA5, JNK and ERK1/2) stripping in sequential chemiluminescent detections. The NC membranes also show clear western signals and background without losing transferred proteins during the reprobing process of WB. Hence, this study report additional new roles of the heat-Induced antigen retrieval Tris-EDTA buffer with 0.01% Tween 20. The method is simpler, more affordable and harmless for the nitrocellulose paper, which will be helpful for effective reprobing in western blotting applications.

A 3D paper microfluidic device for enzyme-linked assays: Application to DNA analysis.

A paper microfluidic device capable of conducting enzyme-linked assays is presented: a microfluidic enzyme-linked paper analytical device (µEL-PAD). The system exploits a wash-free sandwich coupling to form beads/analyte/enzyme complexes, which are subsequently added to the vertical flow device composed of wax-printed paper, waxed nitrocellulose membrane and absorbent/barrier layers. The nitrocellulose retains the bead complexes without disrupting the flow, enabling for an efficient washing step. The entrapped complexes then interact with the chromogenic substrate stored on the detection paper, generating a color change on it, quantified with an open-source smartphone software. This is a universal paper-based technology suitable for high-sensitivity quantification of many analytes, such as proteins or nucleic acids, with different enzyme-linked formats. Here, the potential of the µEL-PAD is demonstrated to detect DNA from Staphylococcus epidermidis. After generation of isothermally amplified genomic DNA from bacteria, Biotin/FITC-labeled products were analyzed with the µEL-PAD, exploiting streptavidin-coated beads and antiFITC-horseradish peroxidase. The µEL-PAD achieved a limit of detection (LOD) and quantification <10 genome copies/µL, these being at least 70- and 1000-fold lower, respectively, than a traditional lateral flow assay (LFA) exploiting immobilized streptavidin and antiFITC-gold nanoparticles. It is envisaged that the device will be a good option for low-cost, simple, quantitative, and sensitive paper-based point-of-care testing.

Sustained-release nitrate combined with microbial fuel cell: A novel strategy for PAHs and odor removal from sediment.

Nitrate addition is a biostimulation technique that can improve both the oxidation of acid volatile sulfide (AVS) through autotrophic denitrification and the biodegradation of polycyclic aromatic hydrocarbons (PAHs) via heterotrophic denitrification. However, during the remediation, parts of the dissolved nitrate in the sediment migrates from the sediment to the overlying water, leading to the loss of effective electron acceptor. To overcome this limitation, a combined approached was proposed, which involved nitrocellulose addition and a microbial fuel cell (MFC). Results indicated the nitrate could be slowly released and maintained at a higher concentration over long term. In the combined system, the removal efficiencies of PAHs and AVS were 71.56% and 89.76%, respectively. Furthermore, the voltage attained for the MFC-nitrocellulose treatment was maintained at 146.1 mV on Day 70, which was 5.37 times higher than that of the MFC-calcium nitrate treatment. Sediments with nitrocellulose resulted in lower levels of nitrate and ammonium in the overlying water. Metagenomic results revealed that the combined technology improved the expression of nitrogen-cycling genes. The introduction of MFC inhibited sulfide regeneration during incubation by suppressing the enzyme activity like EC4.4.1.2. The enhanced biostimulation provided potential for in-situ bioremediation utilizing MFC coupled with slow-released nitrate (i.e., nitrocellulose) treatment.

A case of self-improving collodion ichthyosis associated with a rare variant of the ALOX12B gene.

Collodion baby is usually a manifestation of autosomal recessive congenital ichthyosis, a heterogeneous group of congenital hyperkeratotic genodermatoses with highly variable severity and genetic background. Herein, we report a case of self-improving collodion ichthyosis, a rare subtype of autosomal recessive congenital ichthyosis, characterized by an almost-complete spontaneous resolution of symptoms.

Immunohistochemical localization of glucocorticoid receptors in the human cochlea.

In the present study we investigated the localization of glucocorticoid receptors (GCR) in the human inner ear using immunohistochemistry. Celloidin-embedded cochlear sections of patients with normal hearing (n = 5), patients diagnosed with MD (n = 5), and noise induced hearing loss (n = 5) were immunostained using GCR rabbit affinity-purified polyclonal antibodies and secondary fluorescent or HRP labeled antibodies. Digital fluorescent images were acquired using a light sheet laser confocal microscope. In celloidin-embedded sections GCR-IF was present in the cell nuclei of hair cells and supporting cells of the organ of Corti. GCR-IF was detected in cell nuclei of the Reisner's membrane. GCR-IF was seen in cell nuclei of the stria vascularis and the spiral ligament. GCR-IF was found in the spiral ganglia cell nuclei, however, spiral ganglia neurons showed no GCR-IF. Although GCRs were found in most cell nuclei of the cochlea, the intensity of IF was differential among the different cell types being more intense in supporting cells than in sensory hair cells. The differential expression of GCR receptors found in the human cochlea may help to understand the site of action of glucocorticoids in different ear diseases.